How to install the blade of the arc blade hedge trimmer
1. There are nuts on the arc blade hedge trimmer, which are used to secure the blade. To install, install the blade on the arc blade hedge trimmer disc and tighten the nut.
2. Hold the blade firmly and ensure that it is tightly fastened. After completion, pick up the arc blade hedge trimmer in the suspended state, slowly turn on the power switch, observe the blade rotation, no abnormalities can be put into use.
3. Dirt and weeds need to be regularly removed from the blade as well as the blade holder and inside the arc blade hedge trimmer.
It should be noted that the blade bolt is a special bolt and cannot be replaced by other bolts. Viewed from the bottom up, the blade rotates counterclockwise. Make sure the cutting edge is facing this direction of rotation when mounting.
How do I replace the blade of an arc blade hedge trimmer
1. When replacing an arc blade hedge trimmer blade, obtain a positioning rod, align the small metal cover on the blade with the positioning holes, and insert the positioning rod.
2. Under the blade, there is a larger nut. The nut is used to secure the blade. After the blade of the mower is secured, you can tighten the fixing screw under the head with a wrench that fits the nut.
3. After removing the screw fixing the drill bit, the metal cover under the screw can also be removed.
4. After removing the metal cover, you can see that there is a metal gasket below, and then remove the thicker metal gasket. After the above parts are removed, the blade of the arc blade hedge trimmer can be removed smoothly.
5. Then, the blade to be replaced is placed on the spindle, and the parts fastened by the tool head that have just been removed are put back in the reverse order, and the screws are tightened, so that the tool head of the arc blade hedge trimmer is replaced.
The blade replacement process of arc blade hedge trimmer is not complicated, but because the blade is relatively sharp, the blade has a problem, and it needs to be returned to the factory for repair by the arc blade hedge trimmer manufacturer. In addition, this is only one of the arc blade hedge trimmer blade replacement process, different models will be different, so users when using, try not to replace themselves.
arc blade hedge trimmer https://www.keylead.cn/Electrical-Hedge-Trimmer-Arc-Blade-Supply.html
