In recent years, products like the voc-5 air quality sensor can be regarded as new ones, and their functions are also significant. Although the force sensor is easy to use, there are many problems during the usage process due to improper operation or lack of patience by users. This is mainly because users have little knowledge of the precautions for using the force sensor. Let's give a brief introduction:

voc-5 air quality sensors should be handled with care, especially for small-capacity sensors that use alloy aluminum materials as elastomers. Any shock or drop caused by vibration may lead to huge output errors.

2. During the design of the loading device and the installation process, it is necessary to ensure the effect of the loading force. The stress axis alignment of the voc-5 air quality sensor is carried out to reduce the influence of inclined loads and eccentric loads.

3. Level adjustment: If Hanli sensors are used, a level should be used to adjust the installation plane of the base. Until the level; If multiple sensors are measured simultaneously, the installation surface of the base should be kept as level as possible. The main purpose of doing this is to ensure that the force of each sensor is basically the same.

4. The rated load of the sensor used is determined according to the range selection of the voc-5 air quality sensor in its description.

5. To prevent chemical corrosion. When installing, the outer surface of the voc-5 air quality sensor coated with vaseline should be used. Platforms exposed to direct sunlight and those with drastic changes in environmental temperature should be avoided.

6. Bypass devices made of copper braided wires are added to both ends of the loading device of the voc-5 air quality sensor.

7. Cables should not be lengthened by oneself. When it is indeed necessary to lengthen them, welding should be done at the joints and moisture-proof sealant should be added.

8. Use some baffles around the voc-5 air quality sensor to cover the sensor. The purpose of doing this is to prevent debris from falling into the moving parts of the sensor and affecting its measurement accuracy.

9. The cable of the sensor should be kept away from places with strong power lines or pulse waves. If competition cannot be avoided, the cable of the voc-5 air quality sensor should be run through the iron pipe separately, and the connection distance should be shortened as much as possible.

The loading load of the sensor used in 10 should be determined based on the display range of the Hanli sensor as described in the manual. Although the voc-5 air quality sensor itself has overload capacity, such situations should be avoided as much as possible during installation and use. Sometimes, a short overload period may also cause damage to the sensor. The reason why the precautions for using the milling force sensor are introduced here is to make users more cautious when using the voc-5 air quality sensor in the future, because the voc-5 air quality sensor is often strictly affected by improper operation by users. The more people know about it, the greater the help for using a good voc-5 air quality sensor will be.

voc-5 air quality sensor https://www.cnprosense.com/M-VOC-5-Air-quality-sensor.html