DC planetary geared electric motor in the process of use, it is inevitable that there will be vibration, after all, there is a group of gears in the reducer, so the slight vibration is not related. However, if the vibration amplitude is large or affects the normal operation of the equipment, it needs to be handled in time, otherwise it is easy to cause damage to the planetary reducer, and even equipment damage. So what causes the DC planetary geared electric motor to shake so violently? Below, follow the DC planetary geared electric motor manufacturer to understand:

1, when the reducer and the motor are combined together, the flange screw is not locked, a similar coupling failure occurs separately, or for various reasons, so that the motor vibrates, and then the vibration slows down, so that the DC planetary geared electric motor produces larger vibration.

2. The output shaft is deformed and the force is uneven during operation. When the strength and hardness of the shaft are lower than the requirements or when the shaft is aging for a long time, the shaft deformation will cause large vibration of the planetary reducer.

3, DC planetary geared electric motor internal gear failure. Severe pitting of tooth surface, big gear meshing clearance, severe wear and broken teeth are the main causes of gear damage. Due to excessive load or aging of the gear, these gears will have slight wear, and produce abnormal vibration after slight wear, if these vibrations can not be found in time and treated, it will further wear, and the gear wear of the reducer will reach a moderate degree. DC planetary geared electric motor reducer will exacerbate the vibration, so that the reducer can not work properly.

4, the connection is damaged, when the reducer is connected together, due to oil leakage and other reasons for damage and screw loosening, the vibration will be transmitted to the planetary reducer, resulting in greater vibration of the planetary reducer.

5, when the bearing wear is serious, DC planetary geared electric motor will also occur violent vibration.

6, the motor installation into the force end of the tightening ring screw is not locked, will cause the motor shaft deformation, when the motor runs at high speed, will make the reducer produce huge or violent vibration, serious will cause the motor shaft broken.

When the DC planetary geared electric motor is running on the machine, there will be appropriate vibration. However, in the case of large vibration of the planetary reducer, the vibration problem must be solved and solved as soon as possible to ensure the normal operation of the planetary reducer.

DC planetary geared electric motor https://www.dydzmotor.com/PM-DC-Planetary-Gear-Motor-56JX300K-60ZY105.html